Neptune
Filters
Neptune Systems Apex A3 Jr
Monitoring for all, control ready.The A3 Apex Jr. is the first monitoring only solution that monitors exactly what you need; and, when ready, opens...
View full detailsNeptune Apex System Base Unit
The Apex system prevents catastrophes by monitoring key parameters in your aquarium, takes corrective actions for you, and alerts you via your sma...
View full detailsNeptune Systems 1Link Cable Male to Female 10ft (3m)
Now you no longer need the power supply or Aquabus cable for your DŌS Fluid Metering System. By having the Male x Male 4 pin cable you can now full...
View full detailsNeptune Systems SKY LED Diffused Shimz
SKY Diffused Shimz allow for on-the-fly tweaks to the shimmer produced by your SKY light without the need for any programming or adjustments to lig...
View full detailsNeptune Systems SKY LED Hanging Kit
The Neptune Systems sleek black Hanging Kit matches the aesthetics of the SKY LED, and utilizes the universal four-point mounting system to suspend...
View full detailsNeptune Systems SKY LED Aquarium Light
The SKY is a 200w LED aquarium light, with patented diffuser technology smoothly blending 104 LEDs to create a uniformly blended field of coral-he...
View full detailsNeptune Systems 1/4" Flow Sensor
The Neptune FS-25 Quarter Inch flow Sensor can be placed in line with the flow on 1/4″ tubing, connected to the FMM, and communicate to your Apex t...
View full detailsNeptune Systems FMK- Flow Monitoring Kit
This product must be used in conjunction with an Apex EL or Apex 2016 Starter kit to enable its use. Return Pump:Measuring the flow of your aquariu...
View full detailsNeptune Systems Conductivity Calibration Solution 53 mS/cm
Use this calibration solution to calibrate your Conductivity Probe and PM2 for salinity monitoring.
Neptune Systems Conductivity Calibration Solution 447 uS/cm
Use this calibration solution to calibrate your Conductivity Probe and PM2 for RO/DI water quality monitoring.
Neptune Systems Lab Grade Conductivity Probe
Start measuring salinity in your tank and get alerts when out of range Buy this probe if you are: Replacing an old probeAdding salinity monitoring...
View full detailsNeptune COR 20 Return Pump (apex not required)
Use With or Without an Apex Controller!The intelligent Neptune COR-20 Return Pump is easily the smartest pump available. Directly connecting to any...
View full detailsNeptune Systems Trident reagent kit 2 Month
Neptune System's Replacement Reagent Kit comes with everything you need to change out the reagents for the Trident Marine Water Analyzing System. ...
View full detailsNeptune Systems Trident Marine aquarium water analyzer (Kh /Ca /Mg)
The Trident is an automated testing system that regularly tests alkalinity, calcium, and magnesium in your saltwater aquarium — and then communicat...
View full detailsNeptune Optical Level Sensor with Magnetic Mount
This sensor plugs into your FMM and, using reflected infrared light, will signal your Apex when it changes state from being wet to dry or dry to w...
View full detailsNeptune Optical Level Sensor No Mount
This sensor plugs into your FMM and, using reflected infrared light, will signal your Apex when it changes state from being wet to dry or dry to we...
View full detailsNeptune 1" Flow Sensor
Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Ap...
View full detailsNeptune Systems ApexEL Controller System
The Neptune Apex EL UK Starter Kit prevents catastrophes by monitoring key parameters in your aquarium. It takes corrective actions for you, and al...
View full detailsNeptune Systems PM2 Salinity / Conductivity Module
Having the ability to monitor the salinity of your reef tank is a very valuable piece of information. Usually, if something is to go wrong with yo...
View full detailsNeptune Systems PM1 PH / ORP & Temperature Module
Add the pH/ORP Probe Expansion Module to your Apex Neptune System. Module has extra Temp Probe port I/O Switch Inputs for ATO, feed buttons, leak a...
View full detailsNeptune Systems PM3 Dissolved Oxygen Module
Lets say your Apex system detects low dissolved oxygen in your aquarium, you could have pumps on standby waiting to be activated when levels hit be...
View full detailsNeptune Systems 1link Power and Communication Module
Neptune's answer is the 1LINK. It is called 1LINK because there is one power supply, one module (for up to three 1LINK devices), and a one-click-co...
View full detailsNeptune Systems 1Link Cable Male to Male 10ft (3m)
Now you no longer need the power supply or Aquabus cable for your DŌS Fluid Metering System. By having the Male x Male 4 pin cable you can now full...
View full detailsNeptune PH 10.00 PH Calibration Fluid
Neptune Systems single-use pH calibration packets make calibrating your pH probe simple and fast. Just tear open the top, and a stick your probe in...
View full details