Brightwell Aquatics PhosphatR 250ml

£63.99
Brightwell Aquatics

DELIVERY AVAILABILITY

Currently unavailable in our shop but available from our supplier. Expected delivery Tue 14th April to Fri 17th April (may vary)
Reward Points

REWARD POINTS

You will earn 128 Kraken Points for purchasing this product.

PRICE MATCH

Seen this product cheaper? Check if we can match it

FREE SHIPPING

Free Shipping available for orders over £50

Duologi Finance

Duologi 0% finance on orders over £500

Paypal Credit

Paypal Credit on orders over £99

Overview

  • Next-generation regenerable phosphate adsorption resin effective in marine aquaria; will also remove silicates.
  • Far more effective than activated alumina and granular ferric products.
    Will not negatively impact water quality nor release phosphate or silicate once exhausted; will not break up or disintegrate like ferric medias, and contains no aluminum to dissolve in aquaria and harm inhabitants.
  • Synthetic polymer resin beads provide for durability and excellent flow characteristics;may be employed in fluiduzed-bed, canister, or passive filtration.
  • Regenerable up to five times, dramatically increasing cost effectiveness.

Sizes
175ml | 250ml | 500ml | 1L | 3.8L 


Instructions and Guidelines
Basic: Prior to first use, rinse resin under a stream of purified water. For initial application on aquarium, use 1 ml of PhosphātR per 1 US-gallon of water in system and monitor phosphate concentration during usage. Subsequent application of resin may be at the rate of 2 ml per 1 US-gallon.


Advanced: Prior to first use, rinse resin under a stream of purified water. To a point, effectiveness of resin is directly related to the reaction time it has with aquarium water; the longer the reaction time, the more effectively it will remove phosphate and silicate. Once phosphate concentration (”[PO43-]”) has not changed for a period of 4 - 6 hours, remove and regenerate resin, then reapply if necessary. In all cases, the use of a mechanical pre-filter to remove particulate organic material from water prior to its interaction with this media will prolong effectiveness. Fluidized-bed filtration (recommended): follow instructions of filter manufacturer for optimal volume of media to use in reaction chamber; start at a low flow rate and adjust to keep media in a steady “boil” within lower 2/3 of chamber; flow rate should not be such that resin is ejected into aquarium. Canister filtration: Load resin into filter cartridge as directed by filter manufacturer; leave resin in place until [PO43-] reaches desired level or remains unchanged, as directed above. Slowing the flow of water through the filter may be required to obtain maximum effectiveness of resin. Passive filtration: Place resin loosely in a 150µm mesh filter bag and locate in an area of low- to medium-flow. Turning bag over once during usage will serve to shift the resin beads and increases effectivness of this method.
Regenerate PhosphātR with Brightwell Aquatics RegenerātPHOR

 

Note: Resin sold moist. Keep closed to prevent drying. Weight varies due to moisture content, therefore product is sold by volume rather than weight.

 

Caution: Keep out of reach of children. Not for human consumption.

Brightwell Aquatics PhosphatR 250ml, Brightwell Aquatics available at the best price to buy now from Kraken Corals
More Information
Product Code BRIGHTW-PHOSPHATR-250
Brand Brightwell Aquatics